- small size, light weight, easy to carry
- more economical and efficient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught
- adjustable output current to satisfy the cutting demands based on different kinds of material and thickness of working plate
- small and smooth cutting seam, little transmutation
- built-in over-heat protection, over-voltage protection, under voltage protection and lack of compressed air pressure protection
Portable DC Air Plasma Cutter | |
Model | CUT-60 |
Type | MOSFET |
Rated input voltage (V) | three phase AC380 ±15% |
Rated frequency (Hz) | 50/60 |
Rated input capacity (KVA) | 7.9 |
Rated input current (A) | 12 |
No-load voltage (V) | 260 |
Output current (A) | 20-60 |
Rated working voltage (V) | 104 |
Duty cycle (%) | 60 |
No-load loss (W) | 100 |
Efficiency (%) | 80 |
Power factor | 0.73 |
Net weight (KG) | 16.6 |
Gross weight (KG) | 21 |
Dimension of machine (mm) | 500×210×370 |
Dimension of packing (mm) | 560×270×460 |
Method of arc start | contact |
Cutting thickness (mm) | steel: 1-25 |
Optimum thickness of work piece (mm) | steel: 1-15 |
aluminum/copper: 1-7 | |
Including accessories:earth clamp×1pcs, cable joint×1pcs, grounding cable ×3 meters, pressure regulator×1pcs, gas hose×0.6meter, hose hoop×2pcs, cutting torch×1pcs | |
